HomeNewsArticle Display

Lockheed Martin and Luke AFB expand innovation

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, trains on a virtual reality maintenance trainer July 13, 2020, at Luke Air Force Base, Ariz. The Egress Systems Flight implemented the virtual reality maintenance trainer to enhance training efficiency and reduce training time. The 56th Fighter Wing’s mission is to train the world’s greatest fighter pilots and combat ready Airmen. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, trains on a virtual reality maintenance trainer July 13, 2020, at Luke Air Force Base, Ariz. The Egress Systems Flight implemented the virtual reality maintenance trainer to enhance training efficiency and reduce training time. The 56th Fighter Wing’s mission is to train the world’s greatest fighter pilots and combat ready Airmen. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, trains on a virtual reality maintenance trainer July 13, 2020, at Luke Air Force Base, Ariz. The egress shop is responsible for the overall integrity of the emergency ejection seat system in the F-35A Lightning II. The wing’s mission is to train the world’s greatest fighter pilots and combat ready Airmen. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, trains on a virtual reality maintenance trainer July 13, 2020, at Luke Air Force Base, Ariz. The egress shop is responsible for the overall integrity of the emergency ejection seat system in the F-35A Lightning II. The wing’s mission is to train the world’s greatest fighter pilots and combat ready Airmen. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice (left), trains on a virtual reality maintenance trainer while Tech. Sgt. Ian Rider, 56th CMS aircrew egress systems craftsman, monitors training July 13, 2020, at Luke Air Force Base, Ariz. The egress shop is responsible for the overall integrity of the emergency ejection seat system in the F-35A Lightning II. The egress shop implemented the virtual reality maintenance trainer to enhance training efficiency and reduce training time. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice (left), trains on a virtual reality maintenance trainer while Tech. Sgt. Ian Rider, 56th CMS aircrew egress systems craftsman, monitors training July 13, 2020, at Luke Air Force Base, Ariz. The egress shop is responsible for the overall integrity of the emergency ejection seat system in the F-35A Lightning II. The egress shop implemented the virtual reality maintenance trainer to enhance training efficiency and reduce training time. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman (left), trains Airman 1st Class Delwyn Travillion, 56th CMS aircrew egress systems apprentice, on the installation of flexible linear shaped charge (FLSC) on a 3D-printed F-35A Lightning II canopy July 13, 2020, at Luke Air Force Base, Ariz. The 3D print of the F-35 canopy enables training on the installation of the FLSC without using operational resources. Installation of the FLSC is an essential task that requires zero errors. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman (left), trains Airman 1st Class Delwyn Travillion, 56th CMS aircrew egress systems apprentice, on the installation of flexible linear shaped charge (FLSC) on a 3D-printed F-35A Lightning II canopy July 13, 2020, at Luke Air Force Base, Ariz. The 3D print of the F-35 canopy enables training on the installation of the FLSC without using operational resources. Installation of the FLSC is an essential task that requires zero errors. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman (left), trains Airman 1st Class Delwyn Travillion, 56th CMS aircrew egress systems apprentice, on the installation of a flexible linear shaped charge (FLSC) July 13, 2020, at Luke Air Force Base, Ariz. The FLSC install is a 120-hour process, and the charge must be replaced every three years. Training of this task is essential to the overall integrity of the F-35A Lightning II canopy. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman (left), trains Airman 1st Class Delwyn Travillion, 56th CMS aircrew egress systems apprentice, on the installation of a flexible linear shaped charge (FLSC) July 13, 2020, at Luke Air Force Base, Ariz. The FLSC install is a 120-hour process, and the charge must be replaced every three years. Training of this task is essential to the overall integrity of the F-35A Lightning II canopy. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman, (left) trains Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, on the installation of a flexible linear shaped charge (FLSC) July 13, 2020, at Luke Air Force Base, Ariz. The egress shop implemented a 3D printed F-35A Lightning II canopy to enhance training efficiency and reduce training time. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

Senior Airman Matthew Romano, 56th Component Maintenance Squadron aircrew egress systems journeyman, (left) trains Airman 1st Class Delwyn Travillion, 56th Component Maintenance Squadron aircrew egress systems apprentice, on the installation of a flexible linear shaped charge (FLSC) July 13, 2020, at Luke Air Force Base, Ariz. The egress shop implemented a 3D printed F-35A Lightning II canopy to enhance training efficiency and reduce training time. (U.S. Air Force photo by Airman 1st Class Dominic Tyler)

LUKE AIR FORCE BASE, Ariz. -- The 56th Component Maintenance Squadron’s Egress Systems Flight partnered with Lockheed Martin to work on two innovative technologies that aim to enhance F-35A Lightning II egress maintenance training.

Working closely with Lockheed Martin, the egress shop implemented the Virtual Reality Maintenance Trainer and the use of a full-size 3D print of the F-35 canopy. The goal of these new projects is to reduce the time for training tasks by 50 percent.

The Egress Systems Flight ensures the overall integrity of the emergency ejection seat system in the F-35A Lightning II.

“Without the proper implementation and maintenance of this system, it could be the difference between life and death of the pilot,” said Master Sgt. Joseph Scalise, 56th Component Maintenance Squadron aircrew egress systems section chief. “We are the pilot’s last ditch effort in the event of an aircraft malfunction or system failure.”

According to Scalise, training for various maintenance tasks for this field can be fairly time consuming, and rather than using components that are needed for operational F-35s, the team created their own training aids to ensure maintainers have plenty of hands-on practice.

“Traditional teaching methods rely on a multi-style teaching structure; different styles such as visual, auditory, tactile and kinesthetic,” said Kris Velazquez, Lockheed Martin system engineer. “The Virtual Reality system offers the capability to simultaneously teach across all four learning styles, creating a big impact on training proficiency. With the VR system, a member can obtain the basic knowledge of the F-35 egress system in a few hours.”

While the VR Maintenance Trainer is effective, it is not intended to replace traditional hands-on egress training, said Scalise. The VR system is complimentary to hands-on training; it advances and reinforces a member’s hands-on training, said Velazquez.

Additionally, Lockheed Martin and Luke AFB have created the 3D print of the F-35 canopy. The creation of this replica, said Scalise, introduces training opportunities that were not previously obtainable. One area where this will make a significant difference with lengthy and precise training required on the installation of a flexible linear shaped charge (FLSC).

“We often refer to the installation of the FLSC as an art rather than a skill,” said Scalise. “This is a 120-hour process that must be implemented with zero errors. Taking time to train on this task would drastically lengthen the aircraft downtime. With the new 3D replica, we now have 24-hour access to training on this essential task.”

Though these projects to advance training are new, Velazquez said he expects great promise for the future of their partnership between Lockheed Martin and the Air Force.

“The feedback we received from the Air Force in the development of this technology was a hugely invaluable recourse for us,” said Velasquez. “You could tell they were energized to become more efficient. That type of culture definitely rubs off on us and really makes us want to better the Air Force as a whole. ”

With the success of these training projects in the pursuit for expansive innovation, the partnership between Luke’s Egress Systems Flight and Lockheed Martin could be a catalyst for future technological advancements, according to Michael Morreale, Lockheed Martin Luke F-35 Chief of Maintenance.

“I see that in the future, these training advancements have application, not just Air Force-wide, but throughout all of our partner nations in the F-35 consortium,” said Morreale. “You have to remember we work on aircraft and train pilots from all over the globe.”

While Luke’s partnership with Lockheed Martin is expanding innovation in F-35 training, it also represents more opportunities of a collaborative effort to enable the wing’s core mission: to train the world’s greatest fighter pilots and combat ready Airmen.